charlotte home window replacement near me service

The stability of geometric shapes, the preservation of angles, the overall strength of the structure largely depends on the thickness of the partitions inside the frame. It is difficult to check the jumpers, one can only hope for the veracity of the information indicated in the product passport. This is another fact in favor of choosing windows from large manufacturers - the process is well established there and no one will falsify products, risking damaging their reputation and incurring millions in losses.

How to determine the quality of the profile The first thing you need to pay attention to when buying windows is the appearance of the plastic. If the window is not laminated with decorative wood-like film, then the type of material will tell you a lot. High-quality polyvinyl chloride is a monolithic material, completely smooth, uniform in color. If spots are visible on it, or, worse, small or large grains, this is a fake, which is not worth buying in any case.

Sooner or later, but a sealant working in a stressful mode, which can withstand both mechanical and thermal and chemical influences, the material wears out. It is not difficult to make a replacement even on your own, if you choose a suitable sealant from the entire range of products offered by manufacturers.

Reliability from Salamander: choosing German windows! The best plastic windows are those that satisfy you in terms of size, materials, appearance, functionality and price.

Pay special attention to seals - layers of elastic material along the edges of the profile. It is desirable that they are not tightly attached to the PVC profile, and they can be changed. Otherwise, in case of damage to the seals, you will change the entire profile, and this will cost you much more.

Important! The reliability of the entire structure depends on the type of profile. They are made of PVC and at first glance look the same. Thermal insulation is provided by internal air chambers, and metal reinforcement guarantees strength. The higher the profile class, the greater the thickness of the outer wall.

There are several basic modifications of seals that differ in some properties and, of course, in price. The most common are: Thermoplastic (TPE). Thermopolymer (EPDM). Rubber. Silicone. Let's consider them in more detail.

Therefore, it will not be difficult to choose metal-plastic windows with the right color, but this must be approached wisely - they must fit into the overall architectural appearance, and not be "black sheep". followingThe last step is the most important, because the functionality of the window depends on your choice, i. its purpose as a whole. How to choose a double-glazed window for plastic windows Which double-glazed window to choose Remember - a double-glazed window occupies more than 80% of the total area of ​​\u200b\u200bthe structure, and its enclosing functionality directly depends on which double-glazed window to choose for the window block. Therefore: Determine what functions your future window should perform (energy saving, noise protection, sun protection, impact resistance, etc.); Please note that a double-glazed window can perform several functions, that is, be multifunctional, and have in its set all the qualities that you need. It depends on the type of glass selected and its location in the double-glazed unit; As already mentioned, the general purpose of a plastic window depends mainly on the type of double-glazed windows installed, so pay due attention to this. We already have part of the answer to the question “how to choose plastic windows”. After determining the configuration and type of double-glazed window, it's time to start selecting the profile system and fittings for the sashes. Which profile to choose for windows Window profile, PVC profile And so, we have a new task - “how to choose the right profile for a metal-plastic window”, and here we will indicate a number of key points: Whether it will be a Ukrainian product or its imported counterpart - today there is not much difference no. Ukrainian-made window profile (for example, WDS, OpenTeck, AlmPlast) is practically in no way inferior to imported counterparts, at a significantly lower price. And it is worth mentioning that some foreign specialized brands have been producing their products on the territory of Ukraine for a long time (for example, KBE in Zaporozhye, Veka and Aluplast in Brovary); The number of chambers and the installation depth of the profile system directly affect the heat transfer resistance coefficient. This means that the “thicker” the profile and the more air chambers in it, the better its thermal parameters; By choosing a wide profile, you get not only a warmer, but also a more aesthetic design. True, here it is necessary without fanaticism - if you choose plastic windows with a 6-chamber system for "cold glazing" of a balcony, then this is not economically feasible; Be sure to pay attention to the thickness of the reinforcement. The strength characteristics of the PVC structure, its operation and safety depend on this, if it is planned to install anti-burglary fittings. The minimum thickness of the amplifier according to DSTU is 1.5 mm; The choice of fittings for plastic windows Window fittings Choose fittings for metal-plastic windows from well-known, well-established manufacturers; For the first floors, complete the sashes with anti-burglary elements; Choose additional equipment for your window: microlift (to limit sagging of the sash); lock-fuse (blocks the mechanism for turning the handle when the window is folded back for ventilation to prevent the scissors from falling out); micro-ventilation (to conveniently ventilate the room in the cold season); handles with additional blocking of opening (especially important for those who have small children); When choosing between a turn-and-turn opening option, stop at the latter (turn-tilt). Experience shows that such a mechanism is more convenient and practical; And finally, we want to point out typical mistakes when choosing new windows, as well as some other important points. Mistakes when choosing PVC windows Mistakes when choosing plastic windows Do not chase discounts. “Buying discounts” rather than PVC windows themselves is the most common mistake when choosing windows. Look only at the final cost of the entire order and already with all the discounts; Metal-plastic structures are individual products (like a suit that is sewn to order). Therefore, under equal other conditions (the same profile system, double-glazed windows, fittings), the price from different suppliers will be different; As already mentioned - do not look for windows REHAU, Kommerling, ALUPLAST and so on. Buy finished products from these profiles and services for their installation, dismantling of old windows, etc .; Demand the execution of the Agreement with a wet seal, and not just a clerical stamp. Pay attention to the warranty obligations specified in the Agreement and the availability of the warranty card. And also - check the registration data (documents); Choose a supplier that has been on the market for a long time and has a good reputation; We hope that the article will help you make the right choice of windows and let them serve you faithfully for many years!

The product range of the brand is in demand in almost 50 countries around the world. Products are certified and comply with European standards. In order to confirm the quality of the PVC profile from Salamander marked.

Fittings Before choosing a plastic window, pay attention to fittings. It must: meet high strength and durability indicators: the best operational properties are shown by fittings with an external anti-corrosion coating; be multifunctional: easy to open, close, provide multi-stage, automatic, emergency, ventilation, scheduled operation, guarantee protection against unauthorized entry (break-in), prevent attempts to control children.