window glass repair charlotte NC

To be convinced of the quality and high consumer properties of plastic windows, you just need to read about their characteristics in the article brought to your attention and compare them with wooden structures. The text is far from advertising in nature - only objective information. The choice of priorities is up to the reader. Here you will learn how to choose plastic windows, and why some designs are better than others.

You can choose a package by marking - SPO - single-chamber, and SPD - two-chamber. Some manufacturers offer three and four chamber packages, but they turn out to be too heavy and expensive, while reducing thermal conductivity is not very noticeable. There are other ways to reduce energy losses without increasing the number of cameras.

The more chambers, as well as the distance between their walls, the higher the noise performanceo- and thermal insulation. Two-chamber profiles are intended mainly for cold glazing, unsuitable for windows in heated rooms due to low thermal insulation.

The REHAU manufacturer presents 7 types of profile systems: Reliable and economical REHAU ECOSOL 60 profile with a smooth surface and a 15° bevel, suitable for the manufacture of standard doors and windows, balconies and loggias; REHAU SYNEGO 7-chamber PVC profile with increased thermal insulation, which makes it possible to produce windows 50% warmer; REHAU EURO 70 standard five-chamber system, which combines good sound insulation, noise and dust protection; New 6-chamber plastic profile with a depth of 86 mm - REHAU GENEO, made of RAU-FIPRO material and having high thermal insulation performance; The REHAU BRILLANT DESIGN luxury five-chamber system with an exquisite glossy surface has increased rigidity due to 1.5 mm metal reinforcement. REHAU KORSA DESIGN 70 - a five-chamber profile system, a joint development of KORSA and REHAU, will ideally complement the interior of your premises and will please with its appearance. Ideal windows for a "passive house" REHAU GENEO PHZ is an innovative product from REHAU. This is a unique 6-chamber profile system with a depth of 86 mm. A special role in the REHAU GENEO PHZ profile system is played by special thermal modules and an integrated middle sealing circuit. achieve such high energy efficiency levels.

How to choose metal-plastic (PVC) windows, so as not to doubt their quality? Which, according to experts, plastic windows are better to put in a country cottage, and which ones - in an apartment in a city skyscraper?

Availability of certificates For each component of the window (profile, double-glazed window, fittings, components) there is a separate GOST. Manufacturers of materials and products for completing windows must obtain certificates of conformity for their products.

Modern PVC profile windows are a high-tech product, inexpensive, high-quality, easy to use and, most importantly, maintainable. If replacing a sash or glass in a wooden window is a complex and expensive procedure (manufacturers of windows and doors made from natural materials often unreasonably raise prices), then ordering a part of a plastic window is quite affordable for any budget.

Instead of standard glass, an impact-resistant triplex (two or more layers of glass with a polymer film fixed between them), glass with a multilayer coating that blocks part of the sun's rays can be installed in a double-glazed window.

Good installation Consider, even if you have purchased a window with a bunch of bells and whistles, you may install it incorrectly, as a result of which all the saved heat will go into the gap between the profile and the wall. Specify the qualifications and experience of the installation team, as well as the measurer.

PVC used for the production of profiles has a number of features that manufacturers are constantly struggling with: 1. Sufficiently high linear expansion, reaching several millimeters per meter of length. In order to compensate for this phenomenon, it is necessary to leave special gaps, use reinforcement and correctly calculate the number of fasteners. The same feature of the PVC profile limits mamaximum dimensions of window structures. 2. Low coefficient of elasticity, but even at the factories it is leveled by the use of metal inserts and the correct calculation of the thickness of the inner walls, which are stiffeners. 3. Insufficient temperature stability and UV resistance. Manufacturers also learned to deal with this drawback by introducing special modifiers and stabilizers into PVC, which preserve the color and structure of the material. In high-quality windows, such additives serve no less than the entire structure. They are, in most cases, completely harmless to humans. But if the frame emits a pungent smell that does not disappear for a long time, do not buy this window. It used lead or cadmium, or even more dangerous chemicals, instead of harmless zinc and calcium.