window screen replacements charlotte North Carolina

The product passport must contain all profile parameters, including resistance to low temperatures, or simply indicate the degree of performance. If it is written that the profile belongs to a normal or frost-resistant type, then you can buy without fear, it is designed for negative temperatures.

Therefore, it will not be difficult to choose metal-plastic windows with the right color, but this must be approached wisely - they must fit into the overall architectural appearance, and not be "black sheep". followingThe last step is the most important, because the functionality of the window depends on your choice, i. its purpose as a whole. How to choose a double-glazed window for plastic windows Which double-glazed window to choose Remember - a double-glazed window occupies more than 80% of the total area of ​​\u200b\u200bthe structure, and its enclosing functionality directly depends on which double-glazed window to choose for the window block. Therefore: Determine what functions your future window should perform (energy saving, noise protection, sun protection, impact resistance, etc.); Please note that a double-glazed window can perform several functions, that is, be multifunctional, and have in its set all the qualities that you need. It depends on the type of glass selected and its location in the double-glazed unit; As already mentioned, the general purpose of a plastic window depends mainly on the type of double-glazed windows installed, so pay due attention to this. We already have part of the answer to the question “how to choose plastic windows”. After determining the configuration and type of double-glazed window, it's time to start selecting the profile system and fittings for the sashes. Which profile to choose for windows Window profile, PVC profile And so, we have a new task - “how to choose the right profile for a metal-plastic window”, and here we will indicate a number of key points: Whether it will be a Ukrainian product or its imported counterpart - today there is not much difference no. Ukrainian-made window profile (for example, WDS, OpenTeck, AlmPlast) is practically in no way inferior to imported counterparts, at a significantly lower price. And it is worth mentioning that some foreign specialized brands have been producing their products on the territory of Ukraine for a long time (for example, KBE in Zaporozhye, Veka and Aluplast in Brovary); The number of chambers and the installation depth of the profile system directly affect the heat transfer resistance coefficient. This means that the “thicker” the profile and the more air chambers in it, the better its thermal parameters; By choosing a wide profile, you get not only a warmer, but also a more aesthetic design. True, here it is necessary without fanaticism - if you choose plastic windows with a 6-chamber system for "cold glazing" of a balcony, then this is not economically feasible; Be sure to pay attention to the thickness of the reinforcement. The strength characteristics of the PVC structure, its operation and safety depend on this, if it is planned to install anti-burglary fittings. The minimum thickness of the amplifier according to DSTU is 1.5 mm; The choice of fittings for plastic windows Window fittings Choose fittings for metal-plastic windows from well-known, well-established manufacturers; For the first floors, complete the sashes with anti-burglary elements; Choose additional equipment for your window: microlift (to limit sagging of the sash); lock-fuse (blocks the mechanism for turning the handle when the window is folded back for ventilation to prevent the scissors from falling out); micro-ventilation (to conveniently ventilate the room in the cold season); handles with additional blocking of opening (especially important for those who have small children); When choosing between a turn-and-turn opening option, stop at the latter (turn-tilt). Experience shows that such a mechanism is more convenient and practical; And finally, we want to point out typical mistakes when choosing new windows, as well as some other important points. Mistakes when choosing PVC windows Mistakes when choosing plastic windows Do not chase discounts. “Buying discounts” rather than PVC windows themselves is the most common mistake when choosing windows. Look only at the final cost of the entire order and already with all the discounts; Metal-plastic structures are individual products (like a suit that is sewn to order). Therefore, under equal other conditions (the same profile system, double-glazed windows, fittings), the price from different suppliers will be different; As already mentioned - do not look for windows REHAU, Kommerling, ALUPLAST and so on. Buy finished products from these profiles and services for their installation, dismantling of old windows, etc .; Demand the execution of the Agreement with a wet seal, and not just a clerical stamp. Pay attention to the warranty obligations specified in the Agreement and the availability of the warranty card. And also - check the registration data (documents); Choose a supplier that has been on the market for a long time and has a good reputation; We hope that the article will help you make the right choice of windows and let them serve you faithfully for many years!

What you need to know when choosing a double-glazed window Double-glazed window is 70% of the entire window. In a PVC double-glazed window, the glasses are rigidly fixed, there is a special spacer between them so that the windows are strictly parallel to each other. Sometimes a moisture-absorbing material, silica gel, is placed inside.

The product range of the brand is in demand in almost 50 countries around the world. Products are certified and comply with European standards. In order to confirm the quality of the PVC profile from Salamander marked.

Reinforcing profile PVC insert By itself, polyvinyl chloride, even modified with chemical additives, is not a very strong material mechanically, moreover, it is prone to thermal deformation. But in combination with metal inserts, its stability and resistance to mechanical stress increase by an order of magnitude. It is more reliable to fasten all the fittings to the metal, which is quite a lot in a modern window.

Double glazing. When choosing a metal-plastic window, it is important to focus on the quality of a double-glazed window, which differs in: the number of glasses (respectively, the more of them, the more reliable the noise insulation and the higher the energy saving; the best option is a two-chamber option); type of glass (manufacturers offer various options, including incandescent and energy-saving ones, be guided by your own individual needs when choosing).

Certificate of conformity to GOST 30673-2013 for the profile, test reports for intra-profile ventilation, conclusions of laboratory tests for durability and resistance to climatic influences, as well as other documentation confirming the quality of the exprof profile, you will find in the appropriate section on the website.

Modern manufacturers of metal-plastic structures offer many solutions for glazing your home. How to choose a really high-quality window among this variety?

Given the characteristics of glass as a material with a certain rigidity, spatial structures like double-glazed windows are distinguished by certain size restrictions. They can be within a minimum of 300mm on one side and in an aspect ratio of 5:1. But the maximum glazing area should not exceed 3 m2 in a single-chamber package with 4 mm thick glass and 4.2 m2 with 5 mm glass thickness.

Only real professionals can make metal-plastic structures of any configuration. The reputation of the Salamander company is confirmed by a hundred-year history of this brand.