charlotte window screen repair near me

The system width of exprof profiles is 58, 60 or 70 mm, depending on the type of window and the number of chambers. The manufacturer's profile systems allow installing a double-glazed window up to 36 mm thick in a 58 mm profile, and up to 44 mm thick in a 70 mm one.

Slotted air ducts are a channel with a damper that opens manually or automatically. Seam valves have a more complex device with a damper that shuts off the flow at a dangerous level of draft. Overhead mechanisms are able to provide the maximum influx of fresh air, however, they significantly reduce the sound and heat-shielding properties of the window block, therefore they are not widely used.

On the vast expanses of the Internet, a lot has been written about how to choose plastic windows. Nevertheless, we will give a number of general professional recommendations for those who are going to order windows for a house or apartment, but have not yet decided on their choice. Sections of the article: Choosing a plastic window - where to start Window configuration and design How to choose the right color for metal-plastic windows How to choose a double-glazed window for a plastic window Which profile to choose for windows Choosing fittings for plastic windows Mistakes when choosing plastic windows Where to start choosing plastic windows Almost everything who has on the agenda the replacement of old or the purchase of new windows, they begin with the selection of a profile system. And for some reason, it has taken root that the question “which plastic windows are better to install” is immediately associated with the name of the plastic manufacturer. For example, everyone knows Rehau windows. But there are no Rehau windows - there are metal-plastic windows from the Rehau profile. Moreover, the profile itself is only a plastic stick 6.5 meters long. Of course, a PVC profile system is a very important component, but we will do the right thing and, for starters, decide on the configuration. That is, we will decide how your new window will look like. Window configuration and design The shape of the opening (a niche in the wall into which plastic windows are installed in a private house or high-rise building) determines the final form of PVC structures. The most common shape is the classic rectangular, which is the generally accepted standard. But there are also non-standard ones - arches, trapezoids, triangles, a polygon, an oval, etc., which brings its own charm and zest to the home. Configuration and design of plastic windows On the basis of the opening, it is necessary to create a general configuration and design of the future window: visually divide the window niche into vertical and, if necessary, horizontal elements. In this way, you will create a frame with a certain number of sections; determine which of the resulting elements will open (sashes), and which will be “deaf”; think about the color of the windows; How to choose the right color for metal-plastic windows In fact, there are no specific recommendations here, you can choose a color coating, for example, to match the color and texture of wood or monochrome white. The lamination palette is very large, and the lamination film is applied both on the inside of the frame and on the outside in various combined options.

The reinforcing element of the window is a U-shaped or square profile, which is inserted into the largest chamber located in the center. The thickness of the sheet metal from which the profile is formed is in the range of 1.5 - 2 mm. It is made of galvanized steel and is highly resistant to corrosion. An amplifier is installed in almost all structures, although according to the standards, with a frame length of less than 0.8 m, it can not be used.

Usually, if the installation company is an authorized partner of a well-known foreign company, the risks during installation are reduced to zero. Western companies carefully monitor the qualifications of installers so that the client does not suddenly complain about an incorrectly installed excellent window.

Sooner or later, but a sealant working in a stressful mode, which can withstand both mechanical and thermal and chemical influences, the material wears out. It is not difficult to make a replacement even on your own, if you choose a suitable sealant from the entire range of products offered by manufacturers.

Why plastic windows are better Hermetic design prevents heat loss, which is especially important in houses with insufficient heating system capacity and apartments in which heating appliances are equipped with meters and temperature controllers.

The reinforcing element of the window is a U-shaped or square profile, which is inserted into the largest chamber located in the center. The thickness of the sheet metal from which the profile is formed is in the range of 1.5 - 2 mm. It is made of galvanized steel and is highly resistant to corrosion. An amplifier is installed in almost all structures, although according to the standards, with a frame length of less than 0.8 m, it can not be used.

The seal should be: as flexible as possible; durable; do not lose their properties at low and high temperatures (-20 ... + 55 0С); do not emit odors and toxic fumes; do not change colors over time.

It will not be superfluous to visit the company's office in order to familiarize yourself with samples and supporting documents. As a rule, companies with at least five years of experience are distinguished by the presence of a license and operate their own production. Their product is certified and meets the requirements of GOST.