window screen repair near me charlotte NC

1. The dimensions of the double-glazed window. The widespread use of plastic windows with double-glazed windows necessitated their unification and standardization. Currently, bags are produced in thicknesses of 24, 26 and 32 mm. Profiles of different manufacturers have different seats, so you should choose a double-glazed window, in accordance with this parameter.

What else to look for when choosing plastic windows We talked about the main parameters of window structures - they should be taken into account when choosing in the first place. However, there are other characteristics that you should pay attention to in order to choose the best option in terms of thermal protection, sound insulation, durability and ease of use.

All profiles in exprof windows are equipped with reinforcing inserts with a thickness of 1.5 to 2 mm and have a protective zinc coating. Double-glazed window The main characteristics of the element: the thickness of the double-glazed window, the number of glasses and, accordingly, the chambers between the glasses, the presence of special glasses with heat-shielding coating.

Window profile width The wider the profile section (the distance between outdoor and indoor surfaces), the warmer and quieter the translucent structure will be. In a wider profile, you can put a double-glazed window with better thermal insulation and noise reduction characteristics.

Advantages and disadvantages of plastic windows In comparison with old-style structures in wooden frames, PVC windows win in everything: durability; aesthetics; tightness; ease of use; parameters of thermal protection and sound insulation; no need for care and insulation.

The device of a double-glazed window 1. Remote frames. 2. Glass. 3. Air gap. 4. Moisture-absorbing granulate. 5. Primary circuit sealant. 6. Sealant of the second circuit.Such a double-glazed window is called single-chamber, since there is only one air cavity. If you install another glass on the same gasket (distance frame), you get a two-chamber double-glazed window. Again, the thermal conductivity will be halved, the noise insulation will increase, but the light transmission will decrease by no more than a few percent. When choosing a double-glazed window, it must be remembered that its weight is 30% more than a single-chamber one, naturally, the cost is higher.

What you need to know about double-glazed windows Expert's recommendations on how to choose a plastic window will certainly touch on double-glazed windows, as one of the most important parts. Like the frame, a double-glazed window is responsible for the level of thermal insulation and noise protection, but, in addition, the level of light transmission depends on the quality of the glass, which is the main function of the window.

types of opening of shutters of plastic windows Deaf windows. Stationary construction of a frame and a double-glazed window. Blind windows do not have fittings and do not open. Most often they are installed as an element of a multi-leaf window or as a showcase. Tilt and turn window. This is the standard and most common type of opening, it is suitable for houses and apartments. The mechanism opens in a horizontal and vertical plane, it is suitable for rectangular, arched and trapezoidal structures. With this option, micro-slit ventilation is possible. Fanlight (windows with a transom). Shtulpovye windows (oar). Their shutters open in one plane and, as a rule, open into the interior of the room. Sliding blocks. Such windows are the right choice for rooms with limited space. They are ideal for glazing loggias and balconies.

It will not be superfluous to visit the company's office in order to familiarize yourself with samples and supporting documents. As a rule, companies with at least five years of experience are distinguished by the presence of a license and operate their own production. Their product is certified and meets the requirements of GOST.

Therefore, it will not be difficult to choose metal-plastic windows with the right color, but this must be approached wisely - they must fit into the overall architectural appearance, and not be "black sheep". followingThe last step is the most important, because the functionality of the window depends on your choice, i. its purpose as a whole. How to choose a double-glazed window for plastic windows Which double-glazed window to choose Remember - a double-glazed window occupies more than 80% of the total area of ​​\u200b\u200bthe structure, and its enclosing functionality directly depends on which double-glazed window to choose for the window block. Therefore: Determine what functions your future window should perform (energy saving, noise protection, sun protection, impact resistance, etc.); Please note that a double-glazed window can perform several functions, that is, be multifunctional, and have in its set all the qualities that you need. It depends on the type of glass selected and its location in the double-glazed unit; As already mentioned, the general purpose of a plastic window depends mainly on the type of double-glazed windows installed, so pay due attention to this. We already have part of the answer to the question “how to choose plastic windows”. After determining the configuration and type of double-glazed window, it's time to start selecting the profile system and fittings for the sashes. Which profile to choose for windows Window profile, PVC profile And so, we have a new task - “how to choose the right profile for a metal-plastic window”, and here we will indicate a number of key points: Whether it will be a Ukrainian product or its imported counterpart - today there is not much difference no. Ukrainian-made window profile (for example, WDS, OpenTeck, AlmPlast) is practically in no way inferior to imported counterparts, at a significantly lower price. And it is worth mentioning that some foreign specialized brands have been producing their products on the territory of Ukraine for a long time (for example, KBE in Zaporozhye, Veka and Aluplast in Brovary); The number of chambers and the installation depth of the profile system directly affect the heat transfer resistance coefficient. This means that the “thicker” the profile and the more air chambers in it, the better its thermal parameters; By choosing a wide profile, you get not only a warmer, but also a more aesthetic design. True, here it is necessary without fanaticism - if you choose plastic windows with a 6-chamber system for "cold glazing" of a balcony, then this is not economically feasible; Be sure to pay attention to the thickness of the reinforcement. The strength characteristics of the PVC structure, its operation and safety depend on this, if it is planned to install anti-burglary fittings. The minimum thickness of the amplifier according to DSTU is 1.5 mm; The choice of fittings for plastic windows Window fittings Choose fittings for metal-plastic windows from well-known, well-established manufacturers; For the first floors, complete the sashes with anti-burglary elements; Choose additional equipment for your window: microlift (to limit sagging of the sash); lock-fuse (blocks the mechanism for turning the handle when the window is folded back for ventilation to prevent the scissors from falling out); micro-ventilation (to conveniently ventilate the room in the cold season); handles with additional blocking of opening (especially important for those who have small children); When choosing between a turn-and-turn opening option, stop at the latter (turn-tilt). Experience shows that such a mechanism is more convenient and practical; And finally, we want to point out typical mistakes when choosing new windows, as well as some other important points. Mistakes when choosing PVC windows Mistakes when choosing plastic windows Do not chase discounts. “Buying discounts” rather than PVC windows themselves is the most common mistake when choosing windows. Look only at the final cost of the entire order and already with all the discounts; Metal-plastic structures are individual products (like a suit that is sewn to order). Therefore, under equal other conditions (the same profile system, double-glazed windows, fittings), the price from different suppliers will be different; As already mentioned - do not look for windows REHAU, Kommerling, ALUPLAST and so on. Buy finished products from these profiles and services for their installation, dismantling of old windows, etc .; Demand the execution of the Agreement with a wet seal, and not just a clerical stamp. Pay attention to the warranty obligations specified in the Agreement and the availability of the warranty card. And also - check the registration data (documents); Choose a supplier that has been on the market for a long time and has a good reputation; We hope that the article will help you make the right choice of windows and let them serve you faithfully for many years!