home window replacement service charlotte NC

Availability of certificates For each component of the window (profile, double-glazed window, fittings, components) there is a separate GOST. Manufacturers of materials and products for completing windows must obtain certificates of conformity for their products.

PVC windows have recently appeared on the market, the cavities of which are not filled with air, but are filled with foamed heat insulators - expanded polystyrene, for example, or filled with fiberglass materials. Even with a relatively small number of chambers, their thermal insulation characteristics are much higher than air ones. But for now, their price is also higher.

To be convinced of the quality and high consumer properties of plastic windows, you just need to read about their characteristics in the article brought to your attention and compare them with wooden structures. The text is far from advertising in nature - only objective information. The choice of priorities is up to the reader. Here you will learn how to choose plastic windows, and why some designs are better than others.

It is certification that is a tool to protect the buyer from an unscrupulous manufacturer, and also acts as a guarantor of safety, confirmation of the declared quality indicators of the goods.

Window profiles are produced according to EN 12608 SR (Europe) and GOST 30673-99 (Russia). According to the main indicators, they are almost identical. The main parameters are the thickness of the walls of the outer contour and internal partitions. According to these indicators, the profile is divided into three types - "A", "B" and "C".

How to extend the life of seals. A gasket made of any material can last several years, or it can wear out in one season. It all depends on the level of service. Even such a seemingly small part of the window requires some care. It consists in periodic (twice a year, in spring and autumn) cleaning and lubrication with silicone oil. If this is not the case, ordinary glycerin quite successfully replaces it.

The main characteristics of plastic windows To know which plastic windows to choose, determine the important characteristics of each structural element. Choosing a profile for PVC windows and double-glazed windows in accordance with the climatic features of the living area, the location of the house and apartment will help to acquire a high-quality and warm design that will last for decades. Consider the types of components in more detail.

Window profiles are produced according to EN 12608 SR (Europe) and GOST 30673-99 (Russia). According to the main indicators, they are almost identical. The main parameters are the thickness of the walls of the outer contour and internal partitions. According to these indicators, the profile is divided into three types - "A", "B" and "C".

Good installation Consider, even if you have purchased a window with a bunch of bells and whistles, you may install it incorrectly, as a result of which all the saved heat will go into the gap between the profile and the wall. Specify the qualifications and experience of the installation team, as well as the measurer.

The design of the double-glazed window and the purpose of the constituent elements The double-glazed window, as a window structure, appeared quite a long time ago, almost 90 years ago. It has become a worthy replacement for double windows, simplifying their arrangement and retaining the main properties. Their technical essence is simple - two sheets of glass, between which there is an insulating gasket that holds them at some distance from each other. The air cavity that has turned out between them creates a certain barrier to the leakage of heat from the inside and the penetration of cold from the outside. At the same time, the transparency of such a system is very high, even higher than that of a traditional double window.