glass window repair near me service charlotte NC

Reinforcing insert Reinforced windows are stronger and more durable. Reinforcement is an essential component of a high-quality translucent structure. It is necessary so that the windows can resist wind loads, and also do not deform due to thermal expansion. This is especially true for regions with significant temperature fluctuations throughout the year.

PVC used for the production of profiles has a number of features that manufacturers are constantly struggling with: 1. Sufficiently high linear expansion, reaching several millimeters per meter of length. In order to compensate for this phenomenon, it is necessary to leave special gaps, use reinforcement and correctly calculate the number of fasteners. The same feature of the PVC profile limits mamaximum dimensions of window structures. 2. Low coefficient of elasticity, but even at the factories it is leveled by the use of metal inserts and the correct calculation of the thickness of the inner walls, which are stiffeners. 3. Insufficient temperature stability and UV resistance. Manufacturers also learned to deal with this drawback by introducing special modifiers and stabilizers into PVC, which preserve the color and structure of the material. In high-quality windows, such additives serve no less than the entire structure. They are, in most cases, completely harmless to humans. But if the frame emits a pungent smell that does not disappear for a long time, do not buy this window. It used lead or cadmium, or even more dangerous chemicals, instead of harmless zinc and calcium.

Decoration of PVC profiles Who produces high-quality profiles Basic profiles, from which window structures are assembled, are produced by several dozen factories in Europe, Russia and the CIS countries. Only one name of the manufacturing company can tell you how to choose plastic windows correctly. But as a finished product, a lot depends on the specific window assembler and its installation. Experience suggests that expensive quality profiles, as a rule, are used by responsible performers who produce excellent windows.

Making measurements correctly To determine the exact dimensions of the future window, you need to call the measurer. Masters know how to take measurements correctly so that the profile is easy to mount, and in the future there will be no difficulties with operation. But if you want to know the approximate cost of the structure, you can do this work yourself or order a free measurement. To determine the width of the window, the opening is measured along the lower and upper edges, and then in the middle. how to measure the window correctly If the results will vary slightly, you should choose the smallest value. It is necessary to determine the height in a similar way, measuring the opening on the left, right and in the middle. When taking measurements, take into accountthe presence of a mounting gap, the size of which varies between two to five centimeters. Important! The frame size should always be smaller than the opening size. Measurements must be taken inside and outside the room. Having decided on the parameters of a metal-plastic window, its appearance, the number of wings, the presence of a transom, a window sill and a low tide, order a free call for individual production and installation of a window in Kyiv. Managers will promptly calculate the approximate cost of the structure, and you can finally make your choice.

Rebate distance Is PVC profile wall thickness so important? When deciding which plastic windows are better to choose, it is necessarypay attention to the thickness of the outer walls and partitions. If the outer wall is thinner than 2.5 mm and the inner wall is 2 mm thin, then such windows are only suitable for an unheated garage, warehouse or workshop. In a residential building, they are of little use, in the sense of protection from the cold. In addition, it is possible to assemble a relatively small structure from such profiles - in addition to their low intrinsic strength, the walls do not allow fastening powerful fittings.

You can choose a package by marking - SPO - single-chamber, and SPD - two-chamber. Some manufacturers offer three and four chamber packages, but they turn out to be too heavy and expensive, while reducing thermal conductivity is not very noticeable. There are other ways to reduce energy losses without increasing the number of cameras.

1. The dimensions of the double-glazed window. The widespread use of plastic windows with double-glazed windows necessitated their unification and standardization. Currently, bags are produced in thicknesses of 24, 26 and 32 mm. Profiles of different manufacturers have different seats, so you should choose a double-glazed window, in accordance with this parameter.

Certificate of conformity to GOST 30673-2013 for the profile, test reports for intra-profile ventilation, conclusions of laboratory tests for durability and resistance to climatic influences, as well as other documentation confirming the quality of the exprof profile, you will find in the appropriate section on the website.

The window selection procedure is based on a number of criteria that guarantee the user: reliable protection from external noise (which is important for apartments in a metropolis) energy efficiency; protection from rain, wind and cold; protection against unauthorized intrusions; ease of use; durability (at least 10 years).

PVC profile filled with polystyrene What affects the width of the profile The correct choice of plastic windows should be based on a comprehensive analysis of their parameters. One of the main ones is the width of the profile, in a professional language - the mounting depth. For standard windows, it is 50 - 80 mm. If the width of the frame barely reaches 60 mm, then there are no more than three cameras in it, and with a depth of up to 70 mm there are four or even 5.