charlotte window pane replacement

Fittings German fittings GUGerman fittings GU The service life of the window, flawless operation of systems, softness of movement and reliability of protection against burglary depend on the quality of the fittings. Steel components are considered the most durable. Before ordering windows and buying fittings, you need to make sure that you have certificates and markings with brand marks. The company "Windows KORSA" installs high-quality German fittings GU (Gretsch-Unitas GmbH) in window structures.

For protection, comfort and beauty: how to choose plastic windows correctly The choice and purchase of metal-plastic windows requires the utmost responsibility, since the installed design provides for a fairly long service life - NOT a year or two, but decades! The modern market is replete with offers from both well-known and beginners offering ready-made engineering solutions, including non-standard ones.

Modern PVC profile windows are a high-tech product, inexpensive, high-quality, easy to use and, most importantly, maintainable. If replacing a sash or glass in a wooden window is a complex and expensive procedure (manufacturers of windows and doors made from natural materials often unreasonably raise prices), then ordering a part of a plastic window is quite affordable for any budget.

Availability of certificates For each component of the window (profile, double-glazed window, fittings, components) there is a separate GOST. Manufacturers of materials and products for completing windows must obtain certificates of conformity for their products.

The reinforcing element of the window is a U-shaped or square profile, which is inserted into the largest chamber located in the center. The thickness of the sheet metal from which the profile is formed is in the range of 1.5 - 2 mm. It is made of galvanized steel and is highly resistant to corrosion. An amplifier is installed in almost all structures, although according to the standards, with a frame length of less than 0.8 m, it can not be used.

Therefore, it will not be difficult to choose metal-plastic windows with the right color, but this must be approached wisely - they must fit into the overall architectural appearance, and not be "black sheep". followingThe last step is the most important, because the functionality of the window depends on your choice, i. its purpose as a whole. How to choose a double-glazed window for plastic windows Which double-glazed window to choose Remember - a double-glazed window occupies more than 80% of the total area of ​​\u200b\u200bthe structure, and its enclosing functionality directly depends on which double-glazed window to choose for the window block. Therefore: Determine what functions your future window should perform (energy saving, noise protection, sun protection, impact resistance, etc.); Please note that a double-glazed window can perform several functions, that is, be multifunctional, and have in its set all the qualities that you need. It depends on the type of glass selected and its location in the double-glazed unit; As already mentioned, the general purpose of a plastic window depends mainly on the type of double-glazed windows installed, so pay due attention to this. We already have part of the answer to the question “how to choose plastic windows”. After determining the configuration and type of double-glazed window, it's time to start selecting the profile system and fittings for the sashes. Which profile to choose for windows Window profile, PVC profile And so, we have a new task - “how to choose the right profile for a metal-plastic window”, and here we will indicate a number of key points: Whether it will be a Ukrainian product or its imported counterpart - today there is not much difference no. Ukrainian-made window profile (for example, WDS, OpenTeck, AlmPlast) is practically in no way inferior to imported counterparts, at a significantly lower price. And it is worth mentioning that some foreign specialized brands have been producing their products on the territory of Ukraine for a long time (for example, KBE in Zaporozhye, Veka and Aluplast in Brovary); The number of chambers and the installation depth of the profile system directly affect the heat transfer resistance coefficient. This means that the “thicker” the profile and the more air chambers in it, the better its thermal parameters; By choosing a wide profile, you get not only a warmer, but also a more aesthetic design. True, here it is necessary without fanaticism - if you choose plastic windows with a 6-chamber system for "cold glazing" of a balcony, then this is not economically feasible; Be sure to pay attention to the thickness of the reinforcement. The strength characteristics of the PVC structure, its operation and safety depend on this, if it is planned to install anti-burglary fittings. The minimum thickness of the amplifier according to DSTU is 1.5 mm; The choice of fittings for plastic windows Window fittings Choose fittings for metal-plastic windows from well-known, well-established manufacturers; For the first floors, complete the sashes with anti-burglary elements; Choose additional equipment for your window: microlift (to limit sagging of the sash); lock-fuse (blocks the mechanism for turning the handle when the window is folded back for ventilation to prevent the scissors from falling out); micro-ventilation (to conveniently ventilate the room in the cold season); handles with additional blocking of opening (especially important for those who have small children); When choosing between a turn-and-turn opening option, stop at the latter (turn-tilt). Experience shows that such a mechanism is more convenient and practical; And finally, we want to point out typical mistakes when choosing new windows, as well as some other important points. Mistakes when choosing PVC windows Mistakes when choosing plastic windows Do not chase discounts. “Buying discounts” rather than PVC windows themselves is the most common mistake when choosing windows. Look only at the final cost of the entire order and already with all the discounts; Metal-plastic structures are individual products (like a suit that is sewn to order). Therefore, under equal other conditions (the same profile system, double-glazed windows, fittings), the price from different suppliers will be different; As already mentioned - do not look for windows REHAU, Kommerling, ALUPLAST and so on. Buy finished products from these profiles and services for their installation, dismantling of old windows, etc .; Demand the execution of the Agreement with a wet seal, and not just a clerical stamp. Pay attention to the warranty obligations specified in the Agreement and the availability of the warranty card. And also - check the registration data (documents); Choose a supplier that has been on the market for a long time and has a good reputation; We hope that the article will help you make the right choice of windows and let them serve you faithfully for many years!

For an apartment window in a big city, it makes sense to consider at least a three-chamber profile. For rooms located on high floors, apartments with a poorly functioning heating system, and rooms overlooking highways and multi-lane avenues, five- and six-chamber designs are suitable.

Rebate distance Is PVC profile wall thickness so important? When deciding which plastic windows are better to choose, it is necessarypay attention to the thickness of the outer walls and partitions. If the outer wall is thinner than 2.5 mm and the inner wall is 2 mm thin, then such windows are only suitable for an unheated garage, warehouse or workshop. In a residential building, they are of little use, in the sense of protection from the cold. In addition, it is possible to assemble a relatively small structure from such profiles - in addition to their low intrinsic strength, the walls do not allow fastening powerful fittings.

Availability of certificates For each component of the window (profile, double-glazed window, fittings, components) there is a separate GOST. Manufacturers of materials and products for completing windows must obtain certificates of conformity for their products.

Rebate distance Is PVC profile wall thickness so important? When deciding which plastic windows are better to choose, it is necessarypay attention to the thickness of the outer walls and partitions. If the outer wall is thinner than 2.5 mm and the inner wall is 2 mm thin, then such windows are only suitable for an unheated garage, warehouse or workshop. In a residential building, they are of little use, in the sense of protection from the cold. In addition, it is possible to assemble a relatively small structure from such profiles - in addition to their low intrinsic strength, the walls do not allow fastening powerful fittings.