glass repair service charlotte NC

You can choose a package by marking - SPO - single-chamber, and SPD - two-chamber. Some manufacturers offer three and four chamber packages, but they turn out to be too heavy and expensive, while reducing thermal conductivity is not very noticeable. There are other ways to reduce energy losses without increasing the number of cameras.

How to extend the life of seals. A gasket made of any material can last several years, or it can wear out in one season. It all depends on the level of service. Even such a seemingly small part of the window requires some care. It consists in periodic (twice a year, in spring and autumn) cleaning and lubrication with silicone oil. If this is not the case, ordinary glycerin quite successfully replaces it.

Which package is installed on the window largely depends on the seat on the frame, especially on one characteristic - the depth of the package. In good windows, the outer glass should be at least 15 mm from the front edge of the frame, which are overlapped by the profile rebate. For a mounting depth of the frame of 50 -70 mm, the seat of the double-glazed window ensures this distance is at least 18 mm. Few people pay attention to this parameter when buying, concentrating on the number of cameras and the width of the frame, but for heat-shielding properties it is very important - the smaller the seating depth, the faster the glass will start to freeze and mist.

Only real professionals can make metal-plastic structures of any configuration. The reputation of the Salamander company is confirmed by a hundred-year history of this brand.

Silicone The most resistant of all sealants. It does not give in to abrasion, is indifferent to frost and heat, is sufficiently resistant to the chemical components of urban air and detergents. But its price exceeds TPE and it is quite difficult to buy it, except to order it from a company that sells and installs metal-plastic windows and doors.

Decorated and white windows differ in a number of mechanical indicators. The laminated frame, especially in dark colors, is more heated by the sun. This necessitates the mandatory reinforcement of the profile, regardless of the size of the structure.

Therefore, it will not be difficult to choose metal-plastic windows with the right color, but this must be approached wisely - they must fit into the overall architectural appearance, and not be "black sheep". followingThe last step is the most important, because the functionality of the window depends on your choice, i. its purpose as a whole. How to choose a double-glazed window for plastic windows Which double-glazed window to choose Remember - a double-glazed window occupies more than 80% of the total area of ​​\u200b\u200bthe structure, and its enclosing functionality directly depends on which double-glazed window to choose for the window block. Therefore: Determine what functions your future window should perform (energy saving, noise protection, sun protection, impact resistance, etc.); Please note that a double-glazed window can perform several functions, that is, be multifunctional, and have in its set all the qualities that you need. It depends on the type of glass selected and its location in the double-glazed unit; As already mentioned, the general purpose of a plastic window depends mainly on the type of double-glazed windows installed, so pay due attention to this. We already have part of the answer to the question “how to choose plastic windows”. After determining the configuration and type of double-glazed window, it's time to start selecting the profile system and fittings for the sashes. Which profile to choose for windows Window profile, PVC profile And so, we have a new task - “how to choose the right profile for a metal-plastic window”, and here we will indicate a number of key points: Whether it will be a Ukrainian product or its imported counterpart - today there is not much difference no. Ukrainian-made window profile (for example, WDS, OpenTeck, AlmPlast) is practically in no way inferior to imported counterparts, at a significantly lower price. And it is worth mentioning that some foreign specialized brands have been producing their products on the territory of Ukraine for a long time (for example, KBE in Zaporozhye, Veka and Aluplast in Brovary); The number of chambers and the installation depth of the profile system directly affect the heat transfer resistance coefficient. This means that the “thicker” the profile and the more air chambers in it, the better its thermal parameters; By choosing a wide profile, you get not only a warmer, but also a more aesthetic design. True, here it is necessary without fanaticism - if you choose plastic windows with a 6-chamber system for "cold glazing" of a balcony, then this is not economically feasible; Be sure to pay attention to the thickness of the reinforcement. The strength characteristics of the PVC structure, its operation and safety depend on this, if it is planned to install anti-burglary fittings. The minimum thickness of the amplifier according to DSTU is 1.5 mm; The choice of fittings for plastic windows Window fittings Choose fittings for metal-plastic windows from well-known, well-established manufacturers; For the first floors, complete the sashes with anti-burglary elements; Choose additional equipment for your window: microlift (to limit sagging of the sash); lock-fuse (blocks the mechanism for turning the handle when the window is folded back for ventilation to prevent the scissors from falling out); micro-ventilation (to conveniently ventilate the room in the cold season); handles with additional blocking of opening (especially important for those who have small children); When choosing between a turn-and-turn opening option, stop at the latter (turn-tilt). Experience shows that such a mechanism is more convenient and practical; And finally, we want to point out typical mistakes when choosing new windows, as well as some other important points. Mistakes when choosing PVC windows Mistakes when choosing plastic windows Do not chase discounts. “Buying discounts” rather than PVC windows themselves is the most common mistake when choosing windows. Look only at the final cost of the entire order and already with all the discounts; Metal-plastic structures are individual products (like a suit that is sewn to order). Therefore, under equal other conditions (the same profile system, double-glazed windows, fittings), the price from different suppliers will be different; As already mentioned - do not look for windows REHAU, Kommerling, ALUPLAST and so on. Buy finished products from these profiles and services for their installation, dismantling of old windows, etc .; Demand the execution of the Agreement with a wet seal, and not just a clerical stamp. Pay attention to the warranty obligations specified in the Agreement and the availability of the warranty card. And also - check the registration data (documents); Choose a supplier that has been on the market for a long time and has a good reputation; We hope that the article will help you make the right choice of windows and let them serve you faithfully for many years!

Fittings Before choosing a plastic window, pay attention to fittings. It must: meet high strength and durability indicators: the best operational properties are shown by fittings with an external anti-corrosion coating; be multifunctional: easy to open, close, provide multi-stage, automatic, emergency, ventilation, scheduled operation, guarantee protection against unauthorized entry (break-in), prevent attempts to control children.

How to extend the life of seals. A gasket made of any material can last several years, or it can wear out in one season. It all depends on the level of service. Even such a seemingly small part of the window requires some care. It consists in periodic (twice a year, in spring and autumn) cleaning and lubrication with silicone oil. If this is not the case, ordinary glycerin quite successfully replaces it.

Modern wooden windows are equipped with durable "warm" double-glazed windows, they look aesthetically pleasing, but have a couple of significant drawbacks: high price and the need to update the coating.