charlotte safelite glass repair service

You can choose a package by marking - SPO - single-chamber, and SPD - two-chamber. Some manufacturers offer three and four chamber packages, but they turn out to be too heavy and expensive, while reducing thermal conductivity is not very noticeable. There are other ways to reduce energy losses without increasing the number of cameras.

Profile PVC profile is a frame, that is, the basis of a window structure, and therefore it must: have a high ability to retain heat: the minimum number of chambers acceptable for the climate of Ukraine is three (for example, "Bluevolution"). This option is ideal for glazing of balconies, private houses, including in the northern regions of the country, as well as residential and office premises in the southern part of Ukraine; differ in structural rigidity: a reinforced profile has excellent indicators of this criterion (metal frame thickness - at least 1.5 mm); comply with environmental standards: for high-quality PVC profiles, safe raw materials are used that guarantee stable technical characteristics, do not emit toxins when the temperature changes, have a stylish design: a profile with a uniform surface is a good base for an ideal window, and the trend is white PVC Salamander, not loses its glossy appearance even after decades.

It is because of the poor quality of fittings that buyers of PVC windows face the following problems: jamming of the sash; opening the window only with effort; blowing due to the inability to tightly close the sash; creak.

What you need to know when choosing pvc windows When you want to buy plastic windows, you get the feeling that they are all the same. White in color, with similar handles, glasses and seals - you just need to say the dimensions and choose those that are cheaper. But in this case there are many nuances that it is desirable to know when choosing a window.

Important! The reliability of the entire structure depends on the type of profile. They are made of PVC and at first glance look the same. Thermal insulation is provided by internal air chambers, and metal reinforcement guarantees strength. The higher the profile class, the greater the thickness of the outer wall.

To reinforce the plastic profile, special steel inserts are used, which are mounted directly into the main chamber of the PVC profile. The thickness of steel reinforcement in translucent PVC structures according to GOST should not be less than 1.5 mm.

Making measurements correctly To determine the exact dimensions of the future window, you need to call the measurer. Masters know how to take measurements correctly so that the profile is easy to mount, and in the future there will be no difficulties with operation. But if you want to know the approximate cost of the structure, you can do this work yourself or order a free measurement. To determine the width of the window, the opening is measured along the lower and upper edges, and then in the middle. how to measure the window correctly If the results will vary slightly, you should choose the smallest value. It is necessary to determine the height in a similar way, measuring the opening on the left, right and in the middle. When taking measurements, take into accountthe presence of a mounting gap, the size of which varies between two to five centimeters. Important! The frame size should always be smaller than the opening size. Measurements must be taken inside and outside the room. Having decided on the parameters of a metal-plastic window, its appearance, the number of wings, the presence of a transom, a window sill and a low tide, order a free call for individual production and installation of a window in Kyiv. Managers will promptly calculate the approximate cost of the structure, and you can finally make your choice.

types of opening of shutters of plastic windows Deaf windows. Stationary construction of a frame and a double-glazed window. Blind windows do not have fittings and do not open. Most often they are installed as an element of a multi-leaf window or as a showcase. Tilt and turn window. This is the standard and most common type of opening, it is suitable for houses and apartments. The mechanism opens in a horizontal and vertical plane, it is suitable for rectangular, arched and trapezoidal structures. With this option, micro-slit ventilation is possible. Fanlight (windows with a transom). Shtulpovye windows (oar). Their shutters open in one plane and, as a rule, open into the interior of the room. Sliding blocks. Such windows are the right choice for rooms with limited space. They are ideal for glazing loggias and balconies.

But in slightly more extreme circumstances, such as severe frost or heat, as well as direct sunlight (UV), it can fail. Becoming brittle in the cold and softening in the heat, it quickly becomes unusable if the window sash is actively used. But with the doors constantly closed (or constantly ajar, in micro-ventilation mode, for example), it will last quite a long time.

TPE seal Flexible thermoplastic (TPE) seals are one of the most widely used seals due to their ability to be used on automated assembly lines. It is very convenient for welding, easily changes its shape when compressed by the sashes, quite firmly fills the junction area and seals the window under normal operating conditions.