door frame repair service charlotte NC

Profile PVC profile is a frame, that is, the basis of a window structure, and therefore it must: have a high ability to retain heat: the minimum number of chambers acceptable for the climate of Ukraine is three (for example, "Bluevolution"). This option is ideal for glazing of balconies, private houses, including in the northern regions of the country, as well as residential and office premises in the southern part of Ukraine; differ in structural rigidity: a reinforced profile has excellent indicators of this criterion (metal frame thickness - at least 1.5 mm); comply with environmental standards: for high-quality PVC profiles, safe raw materials are used that guarantee stable technical characteristics, do not emit toxins when the temperature changes, have a stylish design: a profile with a uniform surface is a good base for an ideal window, and the trend is white PVC Salamander, not loses its glossy appearance even after decades.

Rebate distance Is PVC profile wall thickness so important? When deciding which plastic windows are better to choose, it is necessarypay attention to the thickness of the outer walls and partitions. If the outer wall is thinner than 2.5 mm and the inner wall is 2 mm thin, then such windows are only suitable for an unheated garage, warehouse or workshop. In a residential building, they are of little use, in the sense of protection from the cold. In addition, it is possible to assemble a relatively small structure from such profiles - in addition to their low intrinsic strength, the walls do not allow fastening powerful fittings.

Making measurements correctly To determine the exact dimensions of the future window, you need to call the measurer. Masters know how to take measurements correctly so that the profile is easy to mount, and in the future there will be no difficulties with operation. But if you want to know the approximate cost of the structure, you can do this work yourself or order a free measurement. To determine the width of the window, the opening is measured along the lower and upper edges, and then in the middle. how to measure the window correctly If the results will vary slightly, you should choose the smallest value. It is necessary to determine the height in a similar way, measuring the opening on the left, right and in the middle. When taking measurements, take into accountthe presence of a mounting gap, the size of which varies between two to five centimeters. Important! The frame size should always be smaller than the opening size. Measurements must be taken inside and outside the room. Having decided on the parameters of a metal-plastic window, its appearance, the number of wings, the presence of a transom, a window sill and a low tide, order a free call for individual production and installation of a window in Kyiv. Managers will promptly calculate the approximate cost of the structure, and you can finally make your choice.

To be convinced of the quality and high consumer properties of plastic windows, you just need to read about their characteristics in the article brought to your attention and compare them with wooden structures. The text is far from advertising in nature - only objective information. The choice of priorities is up to the reader. Here you will learn how to choose plastic windows, and why some designs are better than others.

EPDM seal Ethylene propylene rubber seal is also a fairly durable material, which, moreover, is cheaper than silicone. It can be found on the windows of the middle and highest price categories, or you can buy it yourself. True, it is not easy to replace it yourself, it is better to call the master.

Which package is installed on the window largely depends on the seat on the frame, especially on one characteristic - the depth of the package. In good windows, the outer glass should be at least 15 mm from the front edge of the frame, which are overlapped by the profile rebate. For a mounting depth of the frame of 50 -70 mm, the seat of the double-glazed window ensures this distance is at least 18 mm. Few people pay attention to this parameter when buying, concentrating on the number of cameras and the width of the frame, but for heat-shielding properties it is very important - the smaller the seating depth, the faster the glass will start to freeze and mist.

The system width of exprof profiles is 58, 60 or 70 mm, depending on the type of window and the number of chambers. The manufacturer's profile systems allow installing a double-glazed window up to 36 mm thick in a 58 mm profile, and up to 44 mm thick in a 70 mm one.

The choice of plastic windows is also connected with aesthetic demands: it is no coincidence that windows are the eyes of the house, so they must be beautiful! What plastic windows are better? We choose according to the profile, double-glazed windows, fittings How to choose plastic windows. Responsive sets of the above criteria. High quality parameters (and priority - technical safety) must meet all individual structural elements, namely: profile; glass fittings.

Fittings Window fittings are not only a handle, but also all the mechanisms located around the main sash, responsible for its movement, fixation incertain provisions.

Choosing a PVC window seal Tightness is one of the mainof plastic windows. It is achieved by using special sealing elements that are laid around the perimeter of the doors and prevent the penetration of moisture and cold from the street and the escape of heat from the side of the house. In addition to these functions, the seal is also a good sound insulator, not inferior in terms of sound reduction to the best double-glazed windows.