window replacement near me

After an approximate calculation on the site, you can choose the nearest offices where you can purchase the company's products, and send them an application that will take into account all the parameters you have chosen.

Profile drainage holes Thermal insulation properties of the window depend on the number of chambers. There must be at least three of them for cold glazing of balconies, loggias and technical rooms and at least 5 for windows of residential premises, offices, retail establishments, hospitals and schools. PVC profile with 3 chambers PVC profile with 3 chambers. PVC profile with 5 chambers PVC profile with 5 chambers.

Even on dirty seals, it is not recommended to use organic or synthetic solvents. It is better to wash with warm water with neutral household detergents, dry well and lubricate. Of course, silicone oil and glycerin are not a panacea, but they can extend the life of seals by several years.

Multifunctional double-glazed windows have good light transmission. Due to the thickness of the profile, they are resistant to mechanical damage.

Fittings Window fittings are not only a handle, but also all the mechanisms located around the main sash, responsible for its movement, fixation incertain provisions.

Double glazing. When choosing a metal-plastic window, it is important to focus on the quality of a double-glazed window, which differs in: the number of glasses (respectively, the more of them, the more reliable the noise insulation and the higher the energy saving; the best option is a two-chamber option); type of glass (manufacturers offer various options, including incandescent and energy-saving ones, be guided by your own individual needs when choosing).

There are no completely low-quality windows on the market now - there are a lot of companies offering windows of their own production and only one-day firms can afford to work with cheap materials. Before ordering windows, you need to find out as much as possible about the company's reputation, see its products, etc. It is best to buy products from large manufacturers - high-quality equipment plays a lot in the manufacture of windows. Many small companies and workshops cannot afford to buy expensive cars, and therefore their products are somewhat worse.

The reinforcing element of the window is a U-shaped or square profile, which is inserted into the largest chamber located in the center. The thickness of the sheet metal from which the profile is formed is in the range of 1.5 - 2 mm. It is made of galvanized steel and is highly resistant to corrosion. An amplifier is installed in almost all structures, although according to the standards, with a frame length of less than 0.8 m, it can not be used.

The most common window profile width levels in Russia are 60 (from 58 to 62 mm) and 70 (from 70 to 76 mm). For most regions of our country, the second option is preferable.

Replacing a double-glazed window with an energy-saving one Why choose KORSA Windows? The main requirements for the windows of apartment buildings are high noise insulation, safety and the possibility of ventilation of the premises. An important factor is the choice of components. Their quality affects the tightness of the doors and the operation of the fittings. Residents of the lower floors should choose plastic windows equipped with protective elements. If small children live in the apartment, it is necessary to have blocking elements from the inside.